Soda Blasting Equipment
The Soda Blaster
The Soda Blaster is the blast generator that propels the blasting media, Maintenance Plus, to the surfaces that require depainting, rust removal, paint etching, or other surface preparation. This process removes paint and contaminate without harming the substrate surface.
No job is too big for the Soda Blaster! Units can be manufactured to meet specific needs.
Soda Blasting utilizes a variety of Soda Blaster units that are designed for portability. Our standard units hold from 25 lbs. (1/2 bag) to 400 lbs. (8 bags) of SodaClean material and require air compressors from 7.5 H.P. to 100 H.P. to propel the blast media.
View a SodaBlast Machine Schematic
 |
 |
 |
 |
|
Model SB-50 1/2 bag capacity Up to 15 hp compressor *SB-100 model 1 bag available |
Model SB-150 1 bag capacity 12-40 hp compressor |
Model SB-200 2 bag capacity 25-75 hp compressor |
Mobile Rig 2 bag capacity 25-75 hp compressor |
The Solu Blaster
SoluBlaster Model SU-200 starts where pressure washers end!
- Hydro-Pressure Non Destructive Cleaning System
- Cleans thoroughly without heat or toxic chemicals
- Remove, etch, and clean old paint, decontaminate.
- Remove Graffiti!
For best results use with pressure washers capable of 3000 PSI at 5 GPM operating level.
Blasting Media
SodaClean Maintenance Plus is a blast media made of specially formulated sodium bicarbonate (baking soda), a non-toxic, non-hazardous food-grade maerial, that is 100% water soluble and is completely environmentally safe. SodaClean Maintenance Plus strips, etches, and removes contaminates. SodaClean Maintenance Plus can be rinsed away after application.
SodaClean Maintenance Plus is packaged in 50 lb. bags. These may purchased individually, in pallets of 49 bags, and by the truck load of 18 pallets (882 bags).
Available to use prior to Soda Blasting is Pre SodaBlast Treatment (PST). PST is an optional treatment to remove hard-difficult paints (such as catalyzed polyurethane) and to significantly reduce time required to remove multiple coats of paint. PST can be applied to vinal decals pre-blasting for easier decal removal. PST comes in 1 gallon cans.
Other types of blastind media are available.
Toll free phone: 1-888-333-SODA | Facsimile: 1-530-626-0366 | Email: sodaman@pacificsodablast.com